Quick Start Set-Up Guide for JG 103

Introduction

This guide provides step-by-step instructions on how to set up the classroom's technology for teaching.

Turning on the PC

1. Check the monitor:

   • If the screen is black, press and hold on the monitor screen for 3-4 seconds.

   • If you still don’t see the PC, proceed to step 2.

2. Access the podium:

   • Open the podium doors located below the drawers.

Open

3. Check the PC:

   • Look for a white light on the power button.

   • If no light is visible, press the power button to turn on the PC.

Open

Signing into the Computer

1. Navigate to the login screen:

   • Press ENTER twice on the keyboard.

   • Use the mouse to select "Other User".
     
     

      

2. Enter your credentials:

   • Type your UNI (without @columbia.edu) in the username field as shown below.

   • Enter your password.
     
     

      

3. Once signed in successfully, you will be taken to the desktop as shown below.

    

    

Setting up Projection

1. Choose your control method:

   • Option A: Use the wall panel

   • Option B: Use the monitor on the podium
     
     

2. Press the "PC" button on your chosen control.

   • This action will:

     • Turn on the projector

     • Lower the screen

     • Display the PC screen

Setting up Microphone

Choose one of the following options:

Option A: Podium Microphone

1. The podium microphone can be used if you prefer to speak at the podium. Adjust the height accordingly to reach your desired volume.
   
   

Option B: Lavaliere Microphone

1. Find the lavaliere microphone on top of the podium (or check the drawers if not visible).

2. Clip the microphone about 6 inches from your mouth.

3. Turn on the power switch (located at the top of the mic).

   • Look for a green light indicating power is on.

4. Speak and adjust the microphone position as needed for desired volume.

Troubleshooting