Page Comparison

...

About HPC Cluster

The new HPC cluster at C2B2 is a Linux-based (Rocky9.4) compute cluster consisting of 62 Dell Server, 2 head nodes, and a virtualized pool of login (submit) nodes, 8 Weka storage nodes, is designed with the goals of running compute intensive AI workloads.

The clusters comprise:

• 8 20 compute nodes, each with 20-192 core processors and 128 768 GB of memory.

• Some 2 nodes have with 192 cores and 1.5 TB of memory.

• 1 40 GPU node featuring 2 NVIDIA L40s GPU cards

• 1 GPU node with a Superchip GH200 ARM architecture, 1 GPU, and 570 GB of memory

This guide will help you get started with using SLURM on these clusters.

Introductions

Jobs are executed in batch mode, without user intervention. The typical process involves

• Logging into the login node ((link unavailable))

• Preparing a job script that specifies the work to be done and required computing resources

• Submitting the job to the queue

• Optionally logging out while the job runs

• Returning to collect the output data once the job is complete

...

• Essential SLURM commands

• Creating a job submission script

• Understanding SLURM partitions

• Submitting jobs to the queue

• Monitoring job progress

• Canceling jobs from the queue

• Setting environment variables

• Managing job dependencies and job arrays

Commands

The following table summarizes the most commonly used SLURM commands:

...

Command

...

Description

...

sbatch

...

Submits a job script for execution.

...

sinfo

...

Displays the status of SLURM-managed partitions and nodes, with customizable filtering, sorting, and formatting options.

...

squeue

...

Shows the status of jobs, with options for filtering, sorting, and formatting, defaulting to priority order for running and pending jobs.

...

srun

...

Run a parallel job on cluster.

...

scancel

...

Cancels a pending or running job

...

sacct

...

Provides accounting information for active or completed jobs.

...

salloc

...

This command is used to allocate resources and submit an interactive job to Slurm, allowing users to execute tasks in real-time with manual input.

SLURM commands offer detailed documentation and guidance through their manual (man) pages, which can be accessed by typing, for example

Submission script

A submission script is a shell script that outlines the computing tasks to be performed, including the application, input/output, and resource requirements (e.g., CPUs, memory). A basic example is a job that needs a single node with the following specifications:

• Uses 1 node

• Runs a single-process application

• Has a maximum runtime of 100 hours

• Is named "MyHelloBatch"

• Sends email notifications to the user when the job starts, stops, or aborts"
  Example: job running on a single node
  Code Block

  language	bash

  #!/bin/bash #MyHelloBatch.slurm # #SBATCH -J test # Job name, any string #SBATCH -o job.%j.out # Name of stdout output file (%j=jobId) #SBATCH -N 1 # Total number of nodes requested #SBATCH -n 8 # Total number of cpu requested #SBATCH -t 01:30:00 # Run time (hh:mm:ss) - 1.5 hours #SBATCH -p highmem # Queue name. Specify gpu for the GPU node. #SBATCH --mail-user=UNI@cumc.columbia.edu # use only Columbia address #SBATCH --mail-type=ALL # send email alert on all events module load anaconda/3.0 # load the appropriate module(s) needed by python hello.py # you program

  192 cores processors and 768 GB memory.

• One NVIDIA Superchip GH200, with 72-core ARM CPU, 1 H100 GPU. Due to tight design, a very high bandwidth between CPU and GPU allows GPU to use of 480 GB CPU memory, apart from GPU’s on-chip 96 GB memory. Although CPU memory is not as fast as GPU’s, a decent 900 GB/s memory bandwidth allows the Large Language Model (LLM) application to access all the 576 GB memory effectively.

The primary network for all the compute nodes and Weka storage is HDR100, the 100 Gbps low-latency Infiniband fabric. Since each node has 192 CPU cores, the need to go across nodes over network is greatly reduced. If a large MPI application still needs to use multiple nodes, the low-latency Infiniband fabric greatly removes network bottlenecks. Each node also has a 25 Gbps IP network for applications that must use IP network. Additionally, a set of login nodes running on Proxmox virtualization provide a pool of virtual login nodes for user access to this and other systems. The login nodes are the primary gateways to the HPC cluster. They are not expected to run heavy duty interactive work, for which users can always start an interactive shell session on a compute node that has more compute resources than login nodes. See below.

Storage for the cluster is provided exclusively by our Weka with over 1 PB of a large bank of all-NVMe very fast drives. WekaFS further boosts performance by distributing the load to 8 servers in parallel. Applications can use GPU-Direct RDMA technology, which bypasses Kernel-based network stack to access data from Weka directly via Mellanox ConnectX-6 NICs. See https://docs.nvidia.com/cuda/gpudirect-rdma/ for more details about this technology.

If you're experiencing issues with the cluster, please reach out to dsbit_help@cumc.columbia.edu for support. To facilitate a quick and precise response, be sure to include the following in your email:

• Your Columbia University ID (UNI)

• Job ID numbers (if your issue is related to a specific job)

Getting Access

In order to get access to this HPC cluster, every research group needs to establish a PI Account using an MoU-SLA agreement that can be downloaded DSBIT-MOU-SLA.pdf This document provides further details about modalities, rights & responsibilities, and charges etc.

Logging In

You will need to use SSH in order to access the cluster.  Windows users can use PuTTY or Cygwin or MobaXterm. MacOS users can use the built-in Terminal application.

Users log in to the cluster's login node at hpc.c2b2.columbia.edu using MC credentials

Interactive login to Compute Node

All users will access the HPC resources via a login node. These nodes are meant for basic tasks like editing files or creating new directories, but not for heavy workloads. If you need to perform certain heavy duty tasks in an interactive mode, you must open an interactive shell session on a compute node using SLURM’s srun command, like an example below. See the SLURM User Guide link on the side navigation to learn more about SLURM.

Interactive login on GPU node

Interactive login on GPU node With memory and time limit