When you first enter the room, you will noticed the projector on the table along with one HDMI cable.
- To get started, the Power button is located on the left side (facing the screen) of the projector.
- After you press the power button, the projector will need up to 2 mins to warm up before displaying your device.
- Then comes the HDMI cable, it is located on the right side of the projector.
- You should now be able to see your device on the projector.
Once you are done using the space, please power down the AV technology in the room.
- To do so, please use press the on/off button two times on the projector.