ScreenBeam is a new wireless display technology that we have recently added in the 14th FL conference room.

To start, please download ScreenBeam's software. Download Link
2. There is an option for both MacOS and Windows, please download and install according to the device you will be using.
3. You might be prompted with admin sign in when installing the software. (Please contact IT: MSPH-Tickets@cumc.columbia.edu)
Then select Blu-ray/DVD option on the Crestron Touch Panel (We replaced the input while leaving the laptop HDMI connection available in the conference room table.)
You will then be prompted with Screenbeam connection instructions on the conference room TV.
You must first connect to ScreenBeam's Wifi, you may also connect your mobile device by scanning the QR code.
2. Wifi: AP-2455A8, Password: "screenbeam"
3. QR code:
For Windows press the
For MacOS
1. After joining the ScreenBeam's wifi, click on "Displays" in your System Preference
2. Then at the bottom left corner under "Add Display", click "ScreenBeam 55A8"
3. After doing so, please give it 5 to 10 seconds for your MacOS to be displayed onto the Conference room TV.

For Zoom

Once you've connected your laptop to ScreenBeam, you'll be able to utilize ScreenBeam's Webcam and Mic.
Under camera settings, please select "In-Room Camera (ScreenBeam)"
Under audio settings, please select "In-Room Microphone (ScreenBeam) for the microphone, and "ScreenBeam55A8" for the speaker.

Browser not supported